Heating

Enerfoil Magnum Ltd is a leading manufacturer of underfloor heating in the UK and has been established for 10 years. The Magnum brand is a leading underfloor heating brand across mainland Europe.

Unlike other companies Enerfoil has never had a failure in any of its underfloor heating elements and conforms to all latest standards and certification.

Enerfoil Magnum Ltd combined advanced technology and quality of service. The product range covers small to large areas, available in low and mains voltage systems to meet all DIY underfloor heating requirements.

Here at Tylers we supply 2 different electric underfloor heating systems of Enerfoil Magnum Ltd supply to meet all underfloor heating requirements:

Enerfoil Underfloor Heating System

Enerfoil underfloor heating product

Enerfoil underfloor heating is a low voltage electric underfloor heating system. Enerfoil is ideal for smaller areas such as Bathrooms and utility rooms, it can be laid directly beneath tiles, stone, marble and slate.

  • Simple to Install
  • Maintenance free heating
  • Only 0.2mm thick - no raising of floor levels
  • Economical to run - 80 watts per mē at 24 volts or 110 watts per mē at 28 volts
  • 100% low voltage - through low voltage transformer
  • Can be installed directly onto wood or concrete (as long as it's smooth and flat)
  • Can be used under various floor finishes - Tile, Stone, Marble and Slate.
  • Can be used in wet areas with a tanking system - e.g. BAL WP1

The Enerfoil low voltage underfloor heating system has been designed to operate at low voltage (24v/28v).

The use of a low voltage supply for the system eliminates the potential hazard associated with using a full mains voltage system in wet or hard traffic areas.

The system is designed to raise the temperature of the flooring material by generating a steady even heat at the rate of approximately 80 watts per square metre to increase the comfort level where unheated flooring would be undesirable.

Enerfoil underfloor heating systems are suitable for installation in either dry areas such as utility rooms and kitchens or wet areas such as bathrooms in both domestic and commercial applications such as Hotels and Hospitals.

Under normal conditions the Enerfoil electric low voltage underfloor heating system will maintain a floor finish at a comfortable temperature. The actual temperature maintained will vary according to the ambient temperature, floor insulation, floor covering and the selected voltage.

The Enerfoil underfloor heating system comprises of a number of manufactured panels, sizes include widths of 250mm, 300mm, 400mm and 600mm, and lengths depending on the width come in continuous lengths of 0.3m to 4.0m, and these can be used in different configurations to get the best possible floor coverage. A low voltage AC current, supplied via a transformer powers the heating panels. 24v AC or 28v AC can be selected to provide optimum heating for the installation and ambient conditions involved. The size of the transformer is determined by the number of panels used in the installation.

Panels should only be connected to the low voltage side of a suitably rated transformer. The Enerfoil Underfloor heating panels are manufactured under strict quality control conditions. It is important that no attempts are made to modify the panels in any way and that they are laid flat on the floor with no irregularities. Under no circumstances should the panels be cut.

The Enerfoil underfloor heating system has been proven to be capable of providing trouble free use if it is installed correctly. The Enerfoil underfloor heating system is designed for ease of installation and safe, economical operation. The Installation of the system however requires electrical checks and connections to be made. This work should only be carried out by a suitably qualified electrician.

Following the instructions contained in the installation leaflet will ensure the reliable and effective operation of your Enerfoil Underfloor Heating System.

Enermat Undertile Heating Mat

Enerfoil underfloor heating product

This electric underfloor heating system is a mains Voltage system designed for existing floors and renovations. This system is suitable for larger areas under Tile, Stone, Marble and slate.

  • Strong Teflon coated cable with PVC outer sheath
  • Waterproof
  • Tested to between 4,000 and 10,000 volts
  • Mains voltage - 230 volts
  • 150 watts per mē
  • Twin conductor cable
  • Can be primary or comfort heating
  • No need for time consuming layout and taping of cable
  • Easy to install mesh mat with cable - pressed into flexible tile adhesive
  • Only 4.0mm thick approx
  • Operates through digital thermostatic control and floor sensor
  • Maintenance free efficient heating
  • No Electro magnetic field
  • For concrete floors under tiles
  • For timber floors - can not go directly onto timber, must go on to cement finished board (compatible with underfloor heating such as Wedi board or Knauf Aquapanel, or a prepared floor.

Electrical floor heating mats can be installed on concrete & prepared timber bases**, directly in flexible tile adhesive.

Floor heating is the most comfortable way of heating. Because of the equable radiation of heat from the entire floor surface, a very nice and equal heat radiation is created. Floor temperature will reach a pleasant and comfortable level, with the same temperature from the floor to the ceiling.

No more cold feet and hot head No more differences in temperatures in the body! No more cold draft on the floor! Experience total freedom in your interior because there are no radiators on the wall!

Enermat is a unique floor-heating mat. It can be installed directly on top of an existing tile floor, or directly on concrete bases. The heating cable on the glass fibre mat is only 3.5 mm in thickness, and can be installed directly in the flexible tile adhesive.

The mat is placed directly under the surface. Because of this the heat reaction time is increased. This makes the system suitable for areas which are not occupied the entire day.

Enermat electrical floor heating has more advantages in comparison to more conventional water based floor-heating systems:

  • Very easy to install
  • No water; no risk of water leakage!
  • No break and cutter work necessary
  • To be installed directly into tile glue
  • Suitable as main* or auxiliary heating source
  • Every room has its own thermostat
  • The highest possible level of comfort
  • Extremely efficient and energy-conscious
  • No maintenance costs

*Main heating is not possible in all situations.

** Please see fitting instructions

For fitting instructions or further information please contact the Tylers showroom.

Glass Fires & BioFireplaces

The Glass Fire, Glass Fire Tables and BioFireplaces are the easy answer to you enjoying the warmth and ambience of a REAL fire anywhere in your home without the need for a chimney.

ADVANTAGES OF A GLASSFIRE

  • Portable - Can be moved to any room in your home or into the garden
  • Compact - Ideal for even the smallest rooms
  • Clean - No soot or ash is produced, absolutely no residue from burning BioFuel
  • Environmentally Friendly - Burning BioFuel produces no harmful emissions
  • Smokeless - No expensive chimney installation required
  • Effective & Efficient - 1 litre of BioFuel burns for 3-6 hours

The Fires are fuelled by Fanola BioFuel which is a pure plant derivative, the burning of which is non-toxic, smokeless, odour-less and completely environmentally friendly experience.

Glass Fires & BioFireplaces can be used in any room in your home creating a warm and romantic atmosphere.

Why not treat yourself to the fire you've always wanted. Our Glass Fires come in a variety of sizes and designs.

Below is a selection of some of the Glass Fires and BioFirplaces which we supply. Click on any of the thumbnails to see a larger image.

Tabletop Models:

glassfire bowl on a square glass table top with square timber legs glassfire bowl on three long glass-slab legs glassfire bowl on a stone table top with wrought iron legs glassfire bowl on a large glass tabletop with brushed aluminium legs and a circular marble base

Floor Standing Models:

glassfire bowl on two concentric glass circles with timber feet glassfire bowl on square glass platform with four marble cube feet glassfire bowl on square glass platform with four 'pebble' feet glassfire bowl on polished steel plinth glassfire bowl on double square stone slab glassfire bowl on three stepped glass squares glassfire bowl on rough stone slab glassfire bowl braced by three glass slabs glassfire bowl on stylised matt aluminium tripod

Traditional Settings:

glassfire on porcelain and iron stand in a bathroom a traditional painted fire surround with open fire effect including logs a fire in a red frame, hung high on a dining room wall a fire in a black frame hung at picture-height a glass tripod fire bowl in an empty room with two champagne glasses a cantilever-effect fire box set in a stone wall an oval polished steel 'wood burning stove' in a living room a fire framed in white set low in a red wall a very small white stone fireplace with chimney breast in a living room an inverted triangle wall sconce in white with a black border, hung on a white stone pillar